|
|
|
|
| UNIT OPTIONS
GARDEN WALL |
| SIZES |
FACES |
Three-plane
split face
- 9" D, 4" H, 12" W
- Weight: 28 lbs
- *Total SFF x 3
|
 |
| *To estimate
the amount of product needed for your wall, follow the directions
on the Estimating page and
apply the calculations to the equation for the desired product. |
| For Example: 55
SFF x 3 = 165 Garden Wall Units Needed |
|
| UNIT OPTIONS
LEGACY STONE |
| SIZES |
FACES |
Three-plane
split face
- 10 3/8" D, 6" H, 16"
W
- Weight: 59 lbs
- *Total SFF x 1.5
|
 |
Classic
straight face
- 10 3/8" D, 6" H, 16"
W
- Weight: 61 lbs
- *Total SFF x 1.5
|
 |
Legacy
cap
- 12" D, 3" H, 16" W
- Weight: 45 lbs
- *Total Wall Length ÷ 1.33
|
 |
|
| CURVES |
BUILDING
CURVES INTO YOUR WALL |
| Curves as small as 2'–2" in
radius can be built with Garden Wall. Legacy Stone curves can be built
with a radius as small as 3'–6". Minimum is at top of wall.
Take into account the set-back on prior courses. |
The
interlocking lip on the Legacy Stone and Garden Wall products can
easily accommodate curves while maintaining consistent set-backs.
When building a tight convex curve, you can remove part of the outside
edges of the lip with a hammer as needed to maintain the proper
setback angle. If building a concave curve, remove the middle of
the lip to maintain proper set-back. If binding or gapping occurs,
you may remove additional sections of the lip. |
Garden
Wall: Minimum radius at top of wall: 2'-2"' |
|
Legacy
Stone: Minimum radius at top of wall: 3'-6' |
 |
 |
|
|
|
|
|
