Lockcrete Bauer is the Retaining Wall Division for
The Bauer Company, Inc. a subsidiary of the Snyder Associated Companies, Inc. and has been the exclusive manufacturer of the Keystone Retaining Wall Products in the Tri-state region since 1995.
KEYSTONE REAR LIP SYSTEM SPECIFICATIONS
UNIT OPTIONS
GARDEN WALL
SIZES
FACES
Three-plane
split face
9" D, 4" H, 12" W
Weight: 28 lbs
*Total SFF x 3
*To estimate
the amount of product needed for your wall, follow the directions
on the Estimating page and
apply the calculations to the equation for the desired product.
For Example:55
SFF x 3 = 165 Garden Wall Units Needed
UNIT OPTIONS
LEGACY STONE
SIZES
FACES
Three-plane
split face
10 3/8" D, 6" H, 16"
W
Weight: 59 lbs
*Total SFF x 1.5
Classic
straight face
10 3/8" D, 6" H, 16"
W
Weight: 61 lbs
*Total SFF x 1.5
Universal
cap
12" D, 3" H, 16" W
Weight: 45 lbs
*Total Wall Length ÷ 1.33
CURVES
BUILDING
CURVES INTO YOUR WALL
Curves as small as 2'–2" in
radius can be built with Garden Wall. Legacy Stone curves can be built
with a radius as small as 3'–6". Minimum is at top of wall.
Take into account the set-back on prior courses.
The
interlocking lip on the Legacy Stone and Garden Wall products can
easily accommodate curves while maintaining consistent set-backs.
When building a tight convex curve, you can remove part of the outside
edges of the lip with a hammer as needed to maintain the proper
setback angle. If building a concave curve, remove the middle of
the lip to maintain proper set-back. If binding or gapping occurs,
you may remove additional sections of the lip.
Garden
Wall: Minimum radius at top of wall: 2'-2"'
Legacy
Stone: Minimum radius at top of wall: 3'-6'
SETBACK
WALLS
Both
the Garden Wall and Legacy Stone units can be designed to incorporate
consistent setbacks.
